全國服務熱線:136-5082-0268137-5185-7398
熱門搜索產品: 燈光信號分配器 燈光信號放大器 信號處理 控制臺 調光控制臺
158-1189-8618
一)CR005P智能開關控制器簡介:
1) CR005P是一款多功能開關控制器產品,它除了具備多種智能控制方式外,同時還具備按順序延時開啟開關的功能,該功能的用途在于防止多臺設備同時上電時產生較大浪涌電流,該浪涌電流有可能會干擾甚至損壞設備,或者引起供電線路跳閘等故障;
2) CR005P的重點在于滿足各種智能控制場合的特殊控制方式的需要,它具備:1)串口控制碼控制方式(包括“Code碼”方式和“學習碼”方式),2)DMX512控制方式,3)MH-Player播放器界面操作鍵控制(或同步控制);當您想得到控制方式而找不到對應設備時, CR005P就是您的首選,它能讓您的普通設備立即變成智能設備;
3) CR005P有靈活的輸出接線模式:它的輸出為繼電器開關信號(繼電器的3個輸出端子在內部沒有接入任何供電,用戶可根據需要自行接線,實現“強電輸出”或“弱電控制”功能),每路繼電器最大可支持2000W的輸出功率,繼電器有“常開”和“常閉”兩種開關狀態輸出。
◆A type of many function switch console , in addition to a variety of intelligent control methods , meanwhile it also has the function of delaying the switch in order.
◆The point of smart switch console is to meet the needs of special control methods for various smart control applications .it has : 1)control methods of serial control code (inside “code ”method and “l(fā)earning code ” methods ) 2) DMX 512 control methods 3) MH-Player interface operation key control (or synchronous control )
◆Each relay can support at least 2000W power output
1)可直接通過CR005P面板上的開關按鍵進行操控與設置控制臺;
2)可通過“串口A”或“串口B”來接收“MH-Player播放器”的控制信號,實現實時控制或?qū)崿F(xiàn)音視頻文件同步觸發智能開關的輸出;
3)可通過“串口A”或“串口B”來接收“主控制器”傳來的控制碼,實現對CR005P智能開關的輸出控制,可實現以下兩種控制模式:“開輸出”和“關輸出”獨立控制,“開輸出”和“關輸出”翻轉控制(此方法主要用于智能應用場合,其中“主控制器”為可輸出串口控制碼的任何設備);
4) 可通過CR005P的“墻板端口”與“KTV墻板”或“中控設備”進行連接,實現對CR005P智能開關進行操控(此方法主要用于KTV及一般室內應用的智能控制場合)
1) Operate and set the controller directly through the switch button on the panel;
2) Realizing real-time control or synchronizations of audio-video files to trigger the output of smart switches through “port A “ and “port B” to receive the control signal of MH-player .
3) It can receive the control code from the “master controller ”through “serial port A ” or “serial port B ” to achieve the output control of the smart switch , and achieve two type of control mode : “switch on output ” and “switch off ” flip control ( This methods is mainly used in smart applications , where is `”master controller ” is any device that can output serial control codes .)
4) It can be connected with “KTV wallboard ” and “central control equipment “” through “ wallboard port “ , implementing control of smart switches . (This methods is mainly used for smart control of KTV and general indoor applications.